SET Proceedings 2978-4387 Caravel Press 10.65582/set.2005.084 2005.084 Preparation, Thermal Performance and Application of Shape-Stabilized PCM in Energy Efficient Buildings ZhangYingping YangRui LinKunping DiHongfa WangXin JiangYi Dept. of Building Science & Technology, Tsinghua University, Beijing, China Dept. of Chemical Engineering, Tsinghua University, Beijing, China 23092005 4 1 978-7-112-07718-2 371 378 23 September 2005 © 2005 Copyright WSSET 2005

Shape-stabilized phase change material (PCM) is a kind of novel PCM. It has the following salient features: large apparent specific heat for phase change temperature region, suitable thermal conductivity, keeping shape stabilized in the phase change process and no need for containers. The preparation for such kind material was investigated and the thermophysical properties of various samples developed by us were measured. Several applications of such material in energy efficient buildings (e.g., in electric under floor space heating system, in wallboard or floor to absorb solar energy to narrow the temperature swing of a day in winter) were studied. Some models of analyzing the thermal performance of the systems were developed, which were validated with our experiments. The following conclusions are obtained: (1) The applications of the novel PCM we put forward are of promising perspectives in different climate regions; (2) By using different paraffin, the melting temperature of shape-stabilize PCM can be adjusted; (3) The heat of fusion of the shape-stabilized PCM building component is in the range of 62-138 kJ/kg; (4) For PCM floor or wallboard to absorb solar energy to narrow the temperature swing in a day in winter, the suitable melting temperature of PCM should be a little higher than the average indoor air temperature of the room without PCM for the period of sunshine; (5) For the electric under-floor space heating system, the optimal melting temperature can be determined by simulation; (6) PCM layer used in the aforementioned application should not be thicker than 2 cm; (7) For given conditions, the numerical model developed by us can provide the prediction and optimal design for applications of shape-stabilized PCM in buildings.

 Energy Efficient Buildings Shape-Stabilized PCM 23 to 25 September 2005 4th International Conference on Sustainable Energy Technologies SET2005 4 Jinan, China Zhang Yinping, M. Groll and D. Steiner, Experimental investigation and modelling of a new kind of latent heat storage system-Indirect contact Galisol system, Heat Transfer-Asian Research, 28(2), 1999, pp.115-128. D. Feldman, M.M. Shapiro, D. Banu, Organic phase change materials for thermal energy storage, Solar Energy Materials, Vol. 13, 1986, pp. 1-10. H Inaba, P Tu. Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material. Heat and Mass Transfer, 32(4), 1997, pp. 307-312. YE Hong, GE Xinshi. Preparation of polyethylene-paraffin compound as a form-stable solid-liquid phase change material. Solar Energy Materials & Solar Cells, 64(1), 2000, pp. 3744. XIAO Min, FENG Bo, GONG Kecheng. Preparation and performance of shape-stabilized phase change thermal storage materials with high thermal conductivity. Energy Conversion & Management, 43(1), 2002, pp. 103-108. XIAO Min, FENG Bo, GONG Kecheng. Thermal performance of a high conductive shape-stabilized thermal storage material, Solar Energy Materials &Solar Cells, 69(3), 2001, pp. 293-296. Xavier Py, Pegis Olives, Sylvain Mauran. Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material. Heat and Mass transfer, 44(14), 2001, pp. 2727-2737. Qin Penghua, Yang Rui, Zhang Yinping, et al., Thermal performance of shape-stabilized phase-change materials, J. of Tsinghua Univ. (Sci. & Tech.), 43(6), 2003, pp.833-835. Athienitis A.K., Chen T.Y. Experimental and theoretical investigation of floor heating with thermal storage. ASHRAE Trans, 99 (1), 1993, pp. 1049-1057. Dale J.D., Ackerman M.Y. A comparison of radiant floor and forced air heating. Proceeding of 15th Annual SESCI Conference, 1989, pp. 15-18. Braun J. Reducing energy costs and peak electrical demand through optimal control of building thermal storage. ASHRAE Transactions, 96 (2), 1990; pp. 876-888. Xu Xu, Yinping Zhang, Kunping Lin, Hongfa Di, Rui Yang, Model and simulation on thermal performance of shape-stabilized phase change material floor, International Solar Energy Conference, Portland, OR, United States, 2004, pp.23-35. Xu Xu, Hongfa Di, Kunping Lin, Yinping Zhang, Rui Yang, Experimental research on thermal performance of shape-stabilized phase change material floor, International Solar Energy Conference, Portland, OR, United States, 2004, pp.37-47. Sherman M.H., Tracer-gas techniques for measuring veritilation in a single zone, Building and Environment, 25, 1990, pp. 365-374. Kunping Lin, Yinping Zhang, Xu Xu, Hongfa Di, Rui Yang, Modelling and simulation of under-floor electric heating system with shape-stabilized PCM plates, Building and Environment. 39(12), 2004, pp. 1427-1434.