SET Proceedings 2978-4387 Caravel Press 10.65582/set.2005.113 2005.113 Research on Performance of Metal Hydride Cooling System LiuZhongbao WangQinghua FangLina QinJiheng PangZongzhan College of Environmental and Energy Engineering, Beijing University of Technology, Beijing, China College of Economic and Management, Beijing University of Technology, Beijing, China 23092005 4 1 978-7-112-07718-2 509 513 23 September 2005 © 2005 Copyright WSSET 2005

Present situation and status of research of metal hydride heat pumps were introduce. The thermodynamics process of hydride cooling system was analyzed. A 2-dimensional model were made respectively. The dynamic mass and heat transfer process in hydride bed was analyzed. The performance parameters, such as cooling power and refrigeration coefficient of performance were calculated and analyzed. The trends along with time of various calculated parameters, such as hydrogen concentration and temperature in reaction bed, pressure and temperature of hydrogen gas, heat exchanged between reaction bed and heat transfer fluid were analyzed. The effects on system coefficient of performance of all kinds of design parameters, such as thickness and conductivity of reaction bed, cycle time, were studied. It can be seen that low conductivity in hydride bed limits the performance of system evidently. Different measures should be taken to enhance the conductivity in bed, such as thinner bed, metal foam, mixing hydride powder with copper or aluminum powder sintered into small balls. Continuous cooling capacity can be produced by two hydride systems. Regenerative heat exchange between pre-heating and pre-cooling process of hydride systems was considered. The results show that the system coefficient of performance was increased by proper duration of regenerative heating.

 Numerical simulation Metal hydride cooling system 2-dimensional model Heat and mass transfer 23 to 25 September 2005 4th International Conference on Sustainable Energy Technologies SET2005 4 Jinan, China N.C. Srivastava , I.W. Eames. A review of adsorbents and adsorbates in solid vapour adsorption heat pump systems.Applied Thermal Engineering ,vol(18).1998: 707-714 T. Gamo, Y. Moriwaki, N. Yanagihara, T. Yamashita, T. Iwaki, Int. J. Hydr. Energy 10 (1985) 39. Y. Moriwaki, T. Gamo, T. Iwaki, J. Less-Comm. Met. 172–174(1991) 1028. B.-H. Liu, D.-M. Kim, K.-Y. Lee, J.-Y. Lee, J. Alloys Comp. 240.(1996) 214–218. A. Koyfman, M. Jelinek, A. Levy, I. Borde, A study on bubble pump performance for di.usion absorption refrigeration system with organic working .uids, in: Proceedings of the Second International Heat Powered Cycles Conference, Paris, 2001. A. Koyfman, M. Jelinek, A. Levy, I. Borde, Experimental study on bubble pump performance with organic working .uids, in: Proceedings of the Third International Conference on Transport Phenomena in Multiphase Systems, Keilce, Poland, 2002.