SET Proceedings 2978-4387 Caravel Press 10.65582/set.2008.060 2008.060 Minimum Fluidization Velocities of Mixtures of Palm Oil Residues and Sand MarpaniFauziah fauziah176@salam.uitm.edu.my RahmanNorazah Abdul Nornizar Faculty of Chemical Engineering, Universiti Teknologi MARA, Shah Alam, Malaysia 24082008 7 1 978-1-995850-08-5 459 467 24 August 2008 © 2008 Copyright WSSET 2008

Understanding and knowledge on the hydrodynamics of fluidization is vital in obtaining an efficient fluidized bed system. The minimum fluidization of mixtures of palm oil residues with inert material (silica sand) in a cold gas fluidized bed has been studied. Oil palm residues consist of palm pressed fibre and palm kernel shell were used as the feed material in a 150mm internal diameter fluidized bed test rig with 1000mm in height. The percentage of palm oil residues in the mixture were: 5, 10, 15, 20, 25 and 30% by weight. It is proven that the appropriate design value of the superficial gas velocity to be used in the operation of biomass gasifier is to take Ucf twice the Umf for mixture of palm kernel shell with silica sand and thrice the Umf for mixture of palm pressed fibre with silica sand. The experimental Umf values were compared to several correlations established by previous researches and it was found that Bilbao et al., 1987 was suitable to be used to predict Umf for binary mixture of palm pressed fibre with silica sand.

 Binary mixture minimum fluidization velocity hydrodynamic palm kernel shell palm pressed fibre 24 to 27 August 2008 7th International Conference on Sustainable Energy Technologies SET2008 7 Seoul, Korea E. O. Gomez and E. S. Lora, "Constructive features, operation and sizing of fluidized-bed gasifiers for biomass," Energy For Sustainable Development, vol. 2, pp. 52-57, 1995. K. Noda, S. Uchida, T. Makino, and H. Kamo, "Minimum fluidization velocity of binary mixture of particles with large size ratio," Powder Technology, vol. 46, pp. 149-154, 1986. B. Formisani, "Packing and fluidization properties of binary mixtures of spherical particles," Powder Technology, vol. 66, pp. 259-264, 1991. M. P. Aznar, F. A. Gracia-Gorria, and J. Corella, "Minimum and maximum velocities for fluidization for mixtures of agricultural and forest residues with second fluidized solid. I. Preliminary data and results with sand-sawdust mixtures," International Chemical Engineering, vol. 32, pp. 95-102, 1992. M. P. Aznar, F. A. Gracia-Gorria, and J. Corella, "Minimum and maximum velocities for fluidization for mixtures of agricultural and forest residues with second fluidized solid. II. Experimental results for different mixtures," International Chemical Engineering, vol. 32, pp. 103-113, 1992. T. R. Rao and J. V. R. Bheemarasetti, "Minimum fluidization velocities of mixtures of biomass and sands," Energy, vol. 26, pp. 633-644, 2001. K. N. Patil, T. J. Bowser, D. D. Bellmer, and R. L. Huhnke, "Fluidization characteristics of sand and chopped switchgrass-sand mixtures," Agricultural Engineering International: The CIGR Ejournal, vol. VII, pp. 1-9, 2005. J. P. Courdec, "Incipient fluidization and particulate system," in Fluidization, J. F. Davidson, R. Clift, and D. Harrison, Eds., Second ed. London: Academic Press, Inc, 1985. W. R. A. Goossens, G. L. Dumont, and G. J. Spaepen, "Fluidization of binary mixtures in the laminar flow region," Chemical Engineering Progress Symposium Series vol. 67, pp. 38-45, 1971. R. Bilbao, J. Lezaun, and J. C. Abanades, "Fluidization velocities of sand/straw binary mixtures," Powder Technology, vol. 52, pp. 1-6, 1987. S. Chiba, T. Chiba, A. W. Nienow, and H. Kobayashi, "The minimum fluidisation velocity, bed expansion and pressure-drop profile of binary particle mixtures " Powder Technology, vol. 22, pp. 255-269 1979. A. R. Otero and J. Corella, An. Soc. Esp. Fis. Quim., vol. 67, pp. 1207–1219, 1971. V. Thonglimp, vol. Docteur-ingeneur thesis. Toulouse: Institut National Polytechnique, 1981. J. Reina, E. Velo, and L. Puigjaner, "Predicting the minimum fluidization velocity of polydisperse mixtures of scrap-wood particles," Powder Technology, vol. 111, pp. 245-251, 2000. A. Kumar and P. Sen Gupta, Indian Journal of Technology, vol. 12, pp. 225, 1974.