SET Proceedings 2978-4387 Caravel Press 10.65582/set.2008.123 2008.123 Passive Cooling Strategies for Improved Thermal Performance of Residential Buildings in Hot-Humid Climates Al-SaadiSaleh salsaadi@squ.edu.om BudaiwiIsmail M. ibudaiwi@kfupm.edu.sa Civil and Architectural Engineering Department, Sultan Qaboos University, Muscat, Sultanate of Oman Architectural Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia 24082008 7 1 978-1-995850-08-5 929 936 24 August 2008 © 2008 Copyright WSSET 2008

Residential buildings are characterized by being envelope-load dominated buildings, hence are greatly influenced by the outside climatic conditions. Due to the harsh climate of Saudi Arabia, residential buildings on average, consume more than half of the total consumed energy. The bulk of this energy is consumed by the air-conditioning system which is required to remove substantial amount of gained heat throughout the year due to poor thermal performance. Implementing proper passive strategies including ventilation strategies and different envelope designs can significantly improve the thermal performance of residential buildings in transition as well as in winter months. The objectives of this paper are to evaluate different ventilation strategies with various envelope designs to improve the thermal performance of residential buildings in hot humid climate of Saudi Arabia. Under the hot-humid climatic conditions of Dhahran, a base case residential building was simulated utilizing the energy simulation program: VisualDOE 4.1 when the air-conditioning is off in transition months (March, April, May, October and November) and in winter months (December, January and February). Different ventilation strategies coupled with various envelope designs were investigated. It is found that when proper ventilation strategies are implemented for different envelope designs, thermal performance is significantly improved. The results of this study can be used to develop smart ventilators or improved AC systems with economizer for residential buildings to improve thermal comfort in transition and winter months without using the traditional air conditioners.

 hot-humid climate ventilation strategies thermal comfort 24 to 27 August 2008 7th International Conference on Sustainable Energy Technologies SET2008 7 Seoul, Korea Mathews E. H., Etzion Y., Erell E, Richards P. G. , and Rousseau P. G. 1992. Simplified analysis of Naturally Ventilated Desert Buildings. Building and Environment. Vol. (27). No. (4). pp. 423-432. Givoni B. 1991. Performance and applicability of passive and low-energy cooling systems. Energy and Buildings. 17. pp. 177-199. Al-Hemiddi N. A. and Al-Saud K. A. 2001. The effect of a ventilated interior courtyard on the thermal performance of a house in a hot-arid region. Renewable Energy. 24. pp.581-595. Rajapaksha I., Nagai H., Okumiya M. 2002. Indoor Thermal Modification of a ventilated Courtyard House in the Tropics. Journal of Asian Architecture and Building Engineering. 94. March. Ratnaweera C., and Hestnes A. G. 1996. Enhancing Cooling in Typical Sri Lankan Dwellings. Building and Environment. 23. pp. 183-190. Shaviv E., Yesioro A., and Capeltuo I. G. 2001. Thermal Mass and Night ventilation as passive Cooling Design Strategy. Renewable Energy. 24. pp.445-452. Sreshthaputra A., Haberl J., and Andrews M. J. 2004. Improving Building Design and Operation of a Thai Buddhist Temple. Energy and Buildings. 36. pp.481-494. Al-Saadi S., Budaiwi, I. 2007. Performance-Based Envelope Design for Residential Buildings in Hot Climates. Building Simulation 2007. Beijing, China, pp. 1726-1733. Al-Azhari, F. B.B. 2002. Barriers to Electrical Energy Conservation in Buildings in Saudi Arabia. In Proc. Of The first Symposium on Energy Conservation and Management in Buildings Conference. Saudi Arabia. 5-6 February. vol. I. pp. 89-98. [In Arabic] ASHRAE, ANSI/ASHRAE Standard 55-2004. 2004. Thermal Environmental Conditions for Human Occupancy. Atlanta: American Society of Heating, Refrigerating, and Air Conditioning Engineers, Inc., USA.