SET Proceedings 2978-4387 Caravel Press 10.65582/set.2008.158 2008.158 The effects of microstructure and its properties on the annealing treatment for ultra-fine grain of 1060 commercial pure aluminums processed by accumulative roll bonding (ARB) ZhangBing YuanShouqian School of Materials Science & Engineering, Xi’an University of Architecture & Technology, Xi’an710055, China 24082008 7 1 978-1-995850-08-5 1168 1176 24 August 2008 © 2008 Copyright WSSET 2008

In this study, ultra-fine grain of 1060 commercial pure aluminums was processed by accumulated rolling bonding (ARB) technology. Effect of microstructure and mechanical properties on the annealing treatment for ultra-fine grained was investigated. The results reveal that, 1060 commercial pure aluminums which was processed after 8 passes ARB at room temperature, grain size of non-deformed was fined from 41μm to 0.42μm, the strength increased 2.5 times, but the elongation ratio decreases. The SEM photos show that the material plastic property drops sharply after being processed, but it is gliding fracture. The samples of ARB different passes receive annealed treatment for 1h at 150℃, because annealing treatment improve the interfacial bond strength of compositing materials, the strength increase a little. The samples after ARB5 passes were annealed for 1h below 200℃, microstructure was in recovery level. Grain size within 0.47μm ～0.58μm, and mechanical properties were stabilization. Above 200℃, grains were recrystallized and the grain size grows up, mechanical properties of materials recovered.

 Accumulative roll bonding ultra-fine grain materials 1060 commercial pure aluminums annealing 24 to 27 August 2008 7th International Conference on Sustainable Energy Technologies SET2008 7 Seoul, Korea Segal V M, Reznikov V I, Drobyshevskii A E. Plasticheskaya Obrabotka Metallov prostym sdvigom(plastic metal working by simple shear)[J]. Metally, 1981,1:115-123. Valiev R Z, Krasilnikov N A,Tsenev N K. Plastic deformation of alloys with submicron-grained structure[J]. Materials Science & Engineering A,1991, 137(15):35-40. R Z Valiev, R. K IsIamgaliev. Bulk Nanostructural Materials from Severe Plastic Deformation[J]. Progress in Materials Science,2000, 45:103~189. Zhang Tingjie, Zhang Xiaomin, Tian Feng, Li Zhongkui. Structure and Properties of Multi-directionally Forged 7075 Aluminum Alloy[J]. Rear Metal Materials and Engineering, 2003, 32(5): 372-374. M Richert, Q Liu, N Hansen. Microstructural Evolution Over A Large Strain Range in Aluminum Deformed by Cyclic Extrusion Compression[J]. Materials Science Engineering A, 1999,260:275~283. Tsuji Nobuhiro, Saito Yoshihiro, Lee Seong Hee. ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials[J]. Advanced Engineering Materials, v 5, n 5, May 1, 2003, p 338-344. Y Saito, N Tsuji, H Utsunomiya. Ultra-fine Grained Bulk Aluminum Produced by Accumulative Roll Bonding(ARB) Process[J]. Scripta Materialia, 1998, 39(9):1221-1227.