In this study the Double effect Absorption Refrigeration system (DAR) is developed and its thermodynamic analysis is performed using different working fluid pairs. The DAR consists of a high and low temperature generator, high and low temperature absorbers, condenser, evaporator, expansion valves, mixture and refrigerant heat exchangers and pumps and it is made up of two cycles. In the DAR system, NH3/H2O is used as refrigerant/absorbent working pair at high temperature cycle and NH3/LiNO3 is used a refrigerant/absorbent working pair at low temperature cycle. This system is called as System I. In order to be able to compare the effects of using different fluid pairs in these two cycles, a new system is formed. In this new system, fluid pair at the high temperature cycle remained same as before (NH3/H2O),but NH3/NaSCN is used at low temperature cycle and this new system is called as System II. While the selected results of calculations of both systems were presented in the figures, only the results of analysis of system II are tabulated in the study. The analysis of the system is performed at various operation conditions and the coefficient of performance (COP) and the high temperature circulation ratios (fH) were calculated and given graphically. Low temperature circulation ratios (fL) were also calculated but not shown in the study. A computer program is developed in FORTRAN for the simulation of the DAR and results are given graphically. The results show that the performance of the NH3/LiNO3 working fluid pair has slightly better performance than NH3/NaSCN, at low temperature cycle for the same working conditions. It is also observed that COP of the double effect system is greater than the COP of single effect system.