The building sector strongly affects the energy required for development, especially for heating and cooling processes. The need to reduce the energy demand and environmental impact must contend with the ever-increasing energy demand within buildings and obsolete building stock. The design and construction of new energy-efficient buildings are inadequate to address the issue, which can only be effectively tackled by improving existing buildings. Given that a significant number of these existing buildings are individually protected or located within protected contexts, interventions can be challenging due to several limitations that reduce the number of possible strategies that can be adopted. Therefore, strategies for the energy refurbishment of historical buildings – particularly those integrated within the building envelope – are crucial to achieving the ambitious aim of reducing the environmental impact of the building sector. The effectiveness of phase change materials (PCMs) was investigated when integrated within lime-based plasters for application on the outermost layer of walls. Experimental tests under real outdoor conditions were carried out initially to estimate whether, and to what extent, the addition of PCMs affected the thermal behavior of walls and the building’s energy demand for cooling. Plasters with different PCMs were developed and arranged in a customized setup at the TekneHub Laboratory, University of Ferrara, and subsequently tested over several months. The results demonstrated good performance in attenuating daily temperature fluctuations and reducing energy consumption.
Keywords. Phase-change materials; Lime plaster; Building energy refurbishment; Historical buildings
References
Sinka M, Bajare D, Jakovics A, Ratnieks J, Gendelis S, Tihana J. Experimental testing of phase change materials in a warm-summer humid continental climate. Energy Build. 2019;195:205-215. doi: 10.1016/j.enbuild.2019.04.030
Asadi E, da Silva MG, Antunes CH, Dias L. Multi-objective optimization for building retrofit strategies: A model and an application. Energy Build. 2012;44:81-87. doi: 10.1016/j.enbuild.2011.10.016
Global Status Report for Buildings and Construction. Available from: https://globalabc.org/resources/publications/2020-global-status-report-buildings-and-construction [Last accessed on 2022 Mar 15].
Pandey B, Banerjee R, Sharma A. Coupled EnergyPlus and CFD analysis of PCM for thermal management of buildings. Energy Build. 2021;231:110598. doi: 10.1016/j.enbuild.2020.110598
Pavlik Z, Trnik A, Keppert M, Pavlikova M, Zumar J, Cerny R. Experimental investigation of the properties of lime-based plaster-containing PCM for enhancing the heat- storage capacity of building envelope. Int J Thermophys. 2014;195:205-215. doi: 10.1007/s10765-013-1550-8
Coppola L, Coffetti D, Lorenzi S. Cement-based renders manufactured with phase-change materials: Applications and feasibility. Adv Mater Sci Eng. 2016;2016:7254823. doi: 10.1155/2016/7254823
Milone D, Peri G, Pitruzzella S, Rizzo G. Are the best available technologies the only viable for energy interventions in historical buildings? Energy Build. 2015;95:39-46. doi: 10.1016/j.enbuild.2014.11.004
European Parliament, Boosting Building Renovation: What Potential and Value for Europe? Available from: https://www.europarl.europa.eu/regdata/etudes/stud/2016/587326/ipol_stu(2016)587326_en.pdf [Last accessed on 2022 Mar 17].
Pajek L, Potočnik J, Košir M. The effect of a warming climate on the relevance of passive design measures for heating and cooling of European single-family detached buildings. Energy Build. 2022;251:111947. doi: 10.1016/j.enbuild.2022.111947
Song Y, Darani KS, Khdair AI, Abu-Rumman G, Kalbasi R. A review on conventional passive cooling methods applicable to arid and warm climates considering economic cost and efficiency analysis in resource-based cities. Energy Rep. 2021;7:2784-2820. doi: 10.1016/j.egyr.2021.04.056
Akeiber H, Nejat P, Majid MZA, et al. A review on phase change material (PCM) for sustainable passive cooling in building envelopes. Renew Sustain Energy Rev. 2016;60:1470-1497. doi: 10.1016/j.rser.2016.03.036
Sá AV, Azenha M, de Sousa H, Samagaio A. Thermal enhancement of plastering mortars with phase change materials: Experimental and numerical approach. Energy Build. 2012;49:16-27. doi: 10.1016/j.enbuild.2012.02.031
Baccega E, Bottarelli M, Su Y. Alternative experimental characterization of phase change material plasterboard using two-step temperature ramping technique. Energy Build. 2022;267:112153. doi: 10.1016/j.enbuild.2022.112153
Baccega E. Thermo-physical characterisation of plasters containing phase change materials (PCMs). Int J Thermophys. 2024;45:33. doi: 10.1007/s10765-023-03327-7
Fassa S. Available from: https://www.fassabortolo.it/it [Last accessed on 2022 Jan 22].
HEROTILE - High Energy Savings in Building Cooling by Roof Tiles Shape Optimization toward a Better above Sheathing Ventilation. Available from: https://www.lifeherotile.eu/it [Last accessed on 2021 Jan 12].
Hukseflux FHF04. Available from: https://www.hukseflux. com/products/heat-flux-sensors/heat-flux-sensors/fhf04- heat-flux-sensor [Last accessed on 2023 Jan 13].
DataTaker. Available from: https://www.thermofisher.com/order/catalog/product/DT85?SID=srch-srp-DT85 [Last accessed on 2023 Jan 13].
Davis Vantage Pro2. Available from: https://www.davisinstruments.com/pages/vantage-pro2 [Last accessed on 2023 Jan 13].
Hukseflux SR20. Available from: https://www.hukseflux. com/products/pyranometers-solar-radiation-sensors/ pyranometers/sr20-pyranometer [Last accessed on 2023 Jan 13].
Smart Advanced Systems GmbH. Available from: https:// www.smart-advanced-systems.de [Last accessed on 2023 Jul 01].
TITK- Thüringisches Institut für Textil- und Kunststoff- Forschung. Available from: https://www.titk.de [Last accessed on 2021 Dec 01].
How to cite this article
Baccega, E. and Bottarelli, M. (2025). 'Lime-plaster enhanced with phase-change materials: An experimental monitoring analysis'. Green Technology & Innovation, 1, pp. 1-13. https://doi.org/10.36922/gti.8108
Check for updates