Skip to content
Caravel Press

Conference paper

Study on High-efficient Integration of the Parabolic Trough Collectors and the Coal-fired Power Generation System

, , ,

1Research Center of Solar Energy & Gas Hydrate, Lanzhou University of Technology, Lanzhou, China

Published
24 August 2010
Pages
1-6
Received
24 August 2010
DOI
10.65582/set.2010.196
Access
Open access, © 2010 Copyright WSSET
Download PDF6 pages · 334 KB

Abstract

The parabolic trough collectors have been proposed to be integrated into the coal-fired power generation system. In this paper, the optimum outlet temperature of collectors was analyzed on the basis of the best operation conditions of the parabolic trough collectors. Then, the integration mode was worked out for a conventional 300MW coal-fired unit and thermo economical performances were analyzed for the integrated system. The results show that, when solar irradiation is 600W/m², the optimum temperature of collectors is 306.55℃. When water from trough collector mixes directly with water from heat regenerator, the best integration mode is that solar water mixes with water from 3# heat regenerator, which renders 23.6% solar-to-electricity conversion and 5.53 g /kWh. coal-saving consumption.

Keywords. solar heat utilization system; optimum temperature; integration mode; thermo economical performance

© 2010 Copyright WSSET

Free to read, download, print and share, unaltered and for non-commercial purposes, provided the authors, the paper and the proceedings are credited. Any other use, including commercial use or adaptation, needs written permission: write to [email protected].

← SET Proceedings