Accurately predicting and analyzing the dynamic coupling between the internal multi-physical processes and the external multi-heat transfer devices of solid oxide fuel cells (SOFCs) is the key to the high-performance operation of fuel cell systems and integration in distributed energy systems. Neither complex multidimensional simulation models nor simplified external characteristic models can achieve fast and accurate dynamic performance analysis of the SOFC system. This paper constructed a new cross-scale dynamic model of SOFC systems by using the standard thermal resistance method to analyze the external heat transfer subsystem and the equivalent circuit method to analyze the internal heat and mass transfer and electrochemical multi-physics coupling processes. The model realizes the overall cross-scale dynamic modeling of the SOFC system from the internal heat and mass transfer and electrochemical processes to the external heat exchange processes by using the characteristic parameters. The cross-scale dynamic model could be used for the holistic modeling of distributed energy systems including other energy conversion devices.
Stambouli, A.B., Traversa, E., 2002. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy. Renewable and Sustainable Energy Reviews, 6(5), 433-455.
Yang, Y., Hao, J., Ju, C., Hao, T., Wang, X., Li, Y., Du, X., 2024. Dynamic cross-scale modeling and thermo-electric response characteristics of PEMFC based on standardized thermal resistance. Energy Conversion and Management, 302, 118133.
Hao, J., Hao, T., Lu, Z., Hong, F., Du, X., Ge, Z., 2023. Cross-scale modeling and optimization analysis of the solid oxide fuel cell cogeneration system based on the heat current method. Energy Conversion and Management, 280, 116828.
Hao, J., Feng, X., Chen, X., Jin, X., Wang, X., Hao, T., Hong, F., Du, X., 2024. Optimal scheduling of active distribution network considering symmetric heat and power source-load spatial-temporal characteristics. Applied Energy, 373, 123974.
He, K.-L., Zhao, T., Ma, H., Chen, Q., 2023. Optimal operation of integrated power and thermal systems for flexibility improvement based on evaluation and utilization of heat storage in district heating systems. Energy, 274, 127421.
Xin, Y.-L., Zhao, T., Chen, X., He, K.-L., Ma, H., Chen, Q., 2022. Heat current method-based real-time coordination of power and heat generation of multi-CHP units with flexibility retrofits. Energy, 252, 124018.
Wang, X., Hao, J., Feng, X., Hao, T., Sun, J., Du, X., Liu, K., Jin, L., 2024. Modeling and performance analysis of a new integrated solid oxide fuel cell and photovoltaic-thermal energy supply system by heat current method. Energy Science & Engineering, 12(9), 3823-3839.
Hao, J., Chen, Q., Li, X., Zhao, T., 2021. A correction factor-based general thermal resistance formula for heat exchanger design and performance analysis. Journal of Thermal Science, 30(3), 892-901.
He, K.-L., Chen, Q., Liu, Y.-T., Hao, J.-H., Wang, Y.-F., Yuan, Y., 2019. A transient heat current model for dynamic performance analysis and optimal control of heat transfer system. International Journal of Heat and Mass Transfer, 145, 118767.
Xingguo, L., 2023. Hydrogen fuel gas turbine and large-scale hydrogen power generation. Chinese Journal of Nature, 45(2), 113-118.
Leonide, A., Apel, Y., Ivers-Tiffee, E., 2009. SOFC Modeling and Parameter Identification by Means of Impedance Spectroscopy. ECS Transactions, 19(20), 81.
Lan, T., Strunz, K., 2020. Modeling of multi-physics transients in PEM fuel cells using equivalent circuits for consistent representation of electric, pneumatic, and thermal quantities. International Journal of Electrical Power & Energy Systems, 119, 105803.
Chan, S.H., Low, C.F., Ding, O.L., 2002. Energy and exergy analysis of simple solid-oxide fuel-cell power systems. Journal of Power Sources, 103(2), 188-200.
Minh, N.Q., Takahashi, T., 1995. Preface, in: Minh, N.Q., Takahashi, T. (Eds.), Science and Technology of Ceramic Fuel Cells, Elsevier Science Ltd, Oxford, pp. vii-viii.
Nehrir, M.H., Wang, C., 2009. Modeling and Control of Fuel Cells: Distributed Generation Applications. Wiley.
Darowicki, K., Janicka, E., Mielniczek, M., Zielinski, A., Gawel, L., Mitzel, J., Hunger, J., 2019. The influence of dynamic load changes on temporary impedance in hydrogen fuel cells, selection and validation of the electrical equivalent circuit. Applied Energy, 251.
Roushenas, R., Zarei, E., Torabi, M., 2021. A novel trigeneration system based on solid oxide fuel cell-gas turbine integrated with compressed air and thermal energy storage concepts: Energy, exergy, and life cycle approaches. Sustainable Cities and Society, 66, 102667.
Campanari, S., 2001. Thermodynamic model and parametric analysis of a tubular SOFC module. Journal of Power Sources, 92(1), 26-34.
Chen, Q., Fu, R.-H., Xu, Y.-C., 2015. Electrical circuit analogy for heat transfer analysis and optimization in heat exchanger networks. Applied Energy, 139, 81-92.
How to cite this article
Hao, T., Hao, J., Wang, X., Lv, H., Chen, H., Chen, J., Dou, Z. and Du, X. (2024). 'Standard thermal impedance-based approach for dynamic response analysis of the solid oxide fuel cell system'. SET Proceedings, 21(2), pp. 320-329. https://doi.org/10.65582/set.2024.090