A Comparative study on the applicability of the solar energy-powered embedded pipe envelope system in different envelope
, , , ,
1Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Lembah Pantai, Kuala Lumpur 50603, Malaysia
2Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Lembah Pantai, Kuala Lumpur 50603, Malaysia
3Yunnan Key Laboratory of Disaster Reduction in Civil Engineering, Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology, Kunming 650500, China
4School of Civil Engineering, Chongqing University, Chongqing 400045, China
This study compares the heating efficiency of the Solar Energy-powered Embedded Pipe Envelope System (SEPES) in various building envelopes using a novel simulation model developed with TRNSYS. The evaluation includes indoor air temperature, inlet and outlet water temperatures in walls, internal surface temperatures of envelopes, and heating energy consumption across six different SEPES installations. Key findings include: 1) SEPES significantly improves indoor temperatures during cold winters in Harbin, with ceiling installations increasing temperatures by up to 8.4℃, and strategic placements optimizing warmth and energy efficiency; 2) Water temperature in SEPES pipes indicates heating capacity, with the highest temperatures in east and west wall installations; 3) Ceiling-embedded pipes perform best in blocking heat loss, with surface temperatures ranging from 7.42℃ to 11.59℃; 4) SEPES installations significantly reduce daily heat loads, with ceiling installations achieving the highest energy-saving rate of 49.7%. Overall, ceiling installations are most effective, followed by the north wall, floor, south wall, east wall, and west wall.
Keywords. Solar Thermal Collector; Pipe Embedded Envelope; Building Envelope Applicability; Thermal Performance
References
CHEN, H., YANG, L. & CHEN, W. 2020. Modelling national, provincial and city-level low-carbon energy transformation pathways. Energy Policy, 137, 111096.
D’ANTONI, M. & SARO, O. 2013. Energy potential of a Massive Solar-Thermal Collector design in European climates. Solar energy, 93, 195-208.
FENG, J., SCHIAVON, S. & BAUMAN, F. 2016. New method for the design of radiant floor cooling systems with solar radiation. Energy and Buildings, 125, 9-18.
GUO, S., YAN, D., HU, S. & ZHANG, Y. 2021. Modelling building energy consumption in China under different future scenarios. Energy, 214, 119063.
HE, Y., ZHOU, H. & FAHIMI, F. 2022. Modeling and demand-based control of responsive building envelope with integrated thermal mass and active thermal insulations. Energy and Buildings, 276, 112495.
JIANG, S., LI, X., LYU, W., WANG, B. & SHI, W. 2020. Numerical investigation of the energy efficiency of a serial pipe-embeddedexternal wall system considering water temperature changes in the pipeline. Journal of Building Engineering, 31, 101435.
JOBLI, M. I., YAO, R., LUO, Z., SHAHRESTANI, M., LI, N. & LIU, H. 2019. Numerical and experimental studies of a Capillary-Tubeembedded PCM component for improving indoor thermal environment. Applied Thermal Engineering, 148, 466-477.
KLEIN, S. A. 2018. Calculation of Flat-Plate Collector Loss Coefficients, Renewable Energy.
KRZACZEK, M., FLORCZUK, J. & TEJCHMAN, J. 2019. Improved energy management technique in pipe-embedded wall heating/cooling system in residential buildings. Applied Energy, 254, 113711.
KRZACZEK, M. & KOWALCZUK, Z. 2011. Thermal Barrier as a technique of indirect heating and cooling for residential buildings. Energy and Buildings, 43, 823-837.
LI, N. & CHEN, Q. 2019. Experimental study on heat transfer characteristics of interior walls under partial-space heating mode in hot summer and cold winter zone in China. Applied Thermal Engineering, 162, 114264.
MA, P., WANG, L.-S. & GUO, N. 2014. Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower. Applied energy, 127, 172-181.
SHEN, C. & LI, X. 2017. Energy saving potential of pipe-embedded building envelope utilizing low-temperature hot water in the heating season. Energy and Buildings, 138, 318-331.
SHEN, C., LI, X. & YAN, S. 2017. Numerical study on energy efficiency and economy of a pipe-embedded glass envelope directly utilizing ground-source water for heating in diverse climates. Energy Conversion and Management, 150, 878-889.
SHEN, J., WANG, Z., LUO, Y., JIANG, X., ZHAO, H., CUI, D. E. & TIAN, Z. 2022. Performance evaluation of an active pipe-embeddedbuilding envelope system to transfer solar heat gain from the south to the north external wall. Journal of Building Engineering, 59, 105123.
SU, X., ZHANG, L., LIU, Z., LUO, Y., LIAN, J. & LUO, Y. 2019. A computational model of an improved cooling radiant ceiling panel system for optimization and design. Building and Environment, 163, 106312.
SUN, H., WU, Y., LIN, B., DUAN, M., LIN, Z. & LI, H. 2020. Experimental investigation on the thermal performance of a novel radiant heating and cooling terminal integrated with a flat heat pipe. Energy and Buildings, 208, 109646.
WANG, L., ONN, C. C., CHEW, B. T., LI, W. & LI, Y. 2024. Numerical Study of the Solar Energy-Powered Embedded Pipe EnvelopeSystem. Buildings, 14, 613.
XIE, J.-L., ZHU, Q.-Y. & XU, X.-H. 2012. An active pipe-embedded building envelope for utilizing low-grade energy sources. Journal of Central South University, 19, 1663-1667.
XU, K., XU, X. & YAN, T. 2023. Performance evaluation of a pipe-embedded phase change material (PE-PCM) roof integrated with solar collector. Journal of Building Engineering, 71, 106582.
XU, X., WANG, S., WANG, J. & XIAO, F. 2010. Active pipe-embedded structures in buildings for utilizing low-grade energy sources: a review. Energy and buildings, 42, 1567-1581.
YANG, M. 2014. Energy consumption analysis and energy-saving air conditioning technology application of commercial complexes in hot summer and cold winter regions. Harbin Institute of Technology.
YANG, Y. & CHEN, S. 2024. Comprehensive thermal performances study on fin-enhanced thermo-activated building envelopes with anisotropic heat injection capacity. Energy Conversion and Management, 300, 117933.
YANG, Y., CHEN, S., CHANG, T., MA, J. & SUN, Y. 2021. Uncertainty and global sensitivity analysis on thermal performances ofpipe-embedded building envelope in the heating season. Energy Conversion and Management, 244, 114509.
YE, M., SERAGELDIN, A. A., RADWAN, A., SATO, H. & NAGANO, K. 2021. Thermal performance of ceiling radiant cooling panel with a segmented and concave surface: Laboratory analysis. Applied Thermal Engineering, 196, 117280.
YI, J. 2005. Energy consumption status of buildings in China and effective energy-saving methods. Heating Ventilating & Air Conditioning, 35, 11.
How to cite this article
Wang, L., Onn, C.C., Chew, B.T., Li, W. and Li, Y. (2024). 'A Comparative study on the applicability of the solar energy-powered embedded pipe envelope system in different envelope'. SET Proceedings, 21(3), pp. 90-101. https://doi.org/10.65582/set.2024.115