Conference paper
Review of Latest Developments in Thermal Insulation Materials for Building Applications
,
1Institute of Sustainable Energy Technology, Department of Architecture and Built Environment, University of Nottingham, University Park, Nottingham NG7 2RD, UK
- Published
- 24 August 2010
- Pages
- 1-13
- Received
- 24 August 2010
- DOI
- 10.65582/set.2010.174
- Access
- Open access, © 2010 Copyright WSSET
Published 24 August 2010·Pages 1-13doi.org/10.65582/set.2010.174
Received 24 Aug 2010Open accessunder © 2010 Copyright WSSET
Download PDF13 pages · 968 KB
Abstract
Buildings are large consumers of energy in all countries. In regions with harsh climatic conditions, a substantial share of energy goes to heat and cool buildings. This heating and air-conditioning lost can be reduced through many means, such as the selection of the building thermal insulation materials. The proper use of thermal insulation material in buildings does not only contribute in reducing the annual energy cost but also helps in extending the periods of thermal comfort without reliance on mechanical heating and air-conditioning. Thermal conductivities of 0.04 W/mK less can be achieved using Aerogel and vacuum insulation panels. The paper is concerned with a review of different types of thermal insulation materials for building applications. The paper also provides information about the performance of different insulation materials and their costs.
Keywords. thermal insulation materials; vacuum insulation panels (VIP); buildings; energy savings
References
- IEA.Renewable for Heating and Cooling: Untapped Potential. France: OECD/IEA; 2007
- http://en.wikipedia.org/wiki/Thermal_insulation
- http://www.competition-commission.org.uk/rep_pub/reports/1999/fulltext/427a4.2.pdf (Review-maininsulation-427a4.2.pdf)
- Mohammad S. Al-Homoud, Performance characteristics and practical applications of common building thermal insulation materials, Building and Environment, v 40, n 3, March, 2005, p353-366. (performance-CommonThermalInsulation-Mohammad2005.pdf)
- SA Omer, SB Riffat, G Qiu, Thermal insulations for hot water cylinders: a review and conceptual evaluation, Building Services Engineering Research & Technology, vol. 28, No.3, 275-293(2007).
- http://www.insulation.kingspan.com/newdiv/products.htm
- http://www.eere.energy.gov/consumer/your_home/insulation_airsealing/index.cfm/mytopic=11620
- Gregory B. Baker, Performance of Expanded Polystyrene Insulated Panel Exposed to Radiant Heat, Master thesis for Fire Engineering, Dept. of Civil Engineering, University of Canterbury, Christchurch, New Zealand, February 2002. ( master-thesis-polystyrene.pdf)
- Zicherman, Joseph, Fire performance of foam-plastic building insulation, Journal of Architectural Engineering, v 9, n 3, September, 2003, p 97-101. (FirePerformance-FoamInsulation-Joseph2003.pdf)
- Breum, N.O., et al, Cellulosic Building Insulation versus Mineral Wool, Fiberglass or Perlite: Installer's Exposure by Inhalation of Fibers, Dust, Endotoxin and Fire-retardant Additives, Annals of Occupational Hygiene, v 47, n 8, November, 2003, p 653-669. (Properties-insulation-Health-Breum2003.pdf)
- Bojic, M., Yik, F.; Leung, W., Thermal insulation of cooled spaces in high rise residential buildings in Hong Kong, Energy Conversion and Management, v 43, n 2, January, 2002, p165-183. (Insulation-cooledspace-Bojic2002.pdf)
- Bojic, M., Yik, F., Sat, P., Influence of thermal insulation position in building envelope on the space cooling of high-rise residential buildings in Hong Kong, Energy and Buildings, v33, n 6, July, 2001, p 569-581. (Insulation-cooledspace-Bojic2001.pdf)
- Kossecka, Elisabeth, Kosny, Jan, Influence of insulation configuration on heating and cooling loads in a continuously used building, Energy and Buildings, v 34, n 4, April, 2002, p321-331. (Influence-Insulation-loads-Elisabeth2002.pdf)
- http://www.cwc.ca/design/building_science/thermal_insulation/
- Comakli, Kemal. Yuksel, Bedri, Environmental impact of thermal insulation thickness in buildings, Applied Thermal Engineering, v 24, n 5-6, April, 2004, p 933-940. (EnvironImpact-InsulationThick-Kemal2004.pdf)
- Arslan, Oguz, Kose, Ramazan, Thermoeconomic optimization of insulation thickness considering condensed vapor in buildings, Energy and Buildings, v 38, n 12, December, 2006, p 1400-1408. (Optim-insulationthick-Arslan2006.pdf)
- Ali Bolatturk, Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey,Applied Thermal Engineering, v 26, n 11-12, 2006, pp 1301-1309. (Optim-insulationthick-Ali2006.pdf)
- Al-Sanea, Sami A. , Zedan, M.F.; Al-Ajlan, Saleh A., Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model, Applied Energy, v 82, n 4, December, 2005, p 313-330. (Optim-insulationthick-Electri-Tariff2005.pdf)
- Al-Khawaja, Mohammed J., Determination and selecting the optimum thickness of insulation for buildings in hot countries by accounting for solar radiation, Applied Thermal Engineering, v 24, n 17-18, December, 2004, p 2601-2610. (Optim-insulationthick-Mohammed2004.pdf)
- Hasan, Afif, Optimizing insulation thickness for buildings using life cycle cost, Applied Energy, v 63, n 2, Jun, 1999, p 115-124. (Optim-insulationthick-Hasan1999.pdf)
- Kemal Comakl, Bedri Yuksel, Optimum insulation thickness of external walls for energy saving, Applied Thermal Engineering 23 (2003) 473–479. ( Opt-thick-buildwall.pdf)
- Gustafsson, Stig-Inge, Optimization of insulation measures on existing buildings, Energy andBuildings, v 33, n 1, Nov, 2000, p 49-55. (Optim-insulationMeasure-Gustafsson2000.pdf)
- Alain C. Pierre and Gérard M. Pajonk, Chemistry of Aerogels and Their Applications,Chem. Rev. 2002, 102, 4243-4265. (aerogel-application-review-Pierre.pdf )
- J.Fricke, A.Emmerling, Aerogels—Recent Progress in Production Techniques and Novel Applications, Journal of Sol-Gel Science and Technology 13, 299–303 (1998). (aerogel-review-Fricke1998.pdf)
- Lawrence W. Hrubesh, Aerogel applications, Journal of Non-Crystalline Solids 225(1998): 335–342 (aerogel-application-Hrubesh-1998.pdf)
- L.W.Hrubesh, J.F.Poco, Thin aerogel films for optical, thermal, acoustic and electronic applications, Journal of Non-Crystalline Solids,188 (1995):46-53. (aerogel-application-Hrubesh1995.pdf)
- Douglas M. Smith, Alok Maskara, Ulrich Boes, Thermal aerogel-based thermal insulation, Journal of Non-Crystalline Solids 225(1998): 254–259. (aerogel-insu-Smith1998.pdf)
- M.Reim, Highly insulating aerogel glazing for solar energy usage, Solar Energy Vol. 72, No.1, pp. 21–29, 2002 (aerogel-window-Reim2002.pdf)
- http://www.designinsite.dk/htmsider/kb0055.htm
- http://www.airglass.se/
- Kim, Gun-Soo, Hyun, Sang-Hoon, Synthesis of window glazing coated with silica aerogel films via ambient drying, Journal of Non-Crystalline Solids, v 320, n 1-3, Jun 1, 2003, p125-132. (aerogel-window-Kim2003.pdf)
- K.Duer, S.Svendsen, Monolithic silica aerogel in superinsulating glazings, Solar Energy Vol. 63, No. 4, pp. 259–267, 1998. (aerogel-window-Duer1998.pdf)
- Douglas M. Smith, Alok Maskara, Ulrich Boes, Thermal aerogel-based thermal insulation, Journal of Non-Crystalline Solids 225_1998.254–259. (aerogel-insu-Smith1998.pdf)
- Jensen, K.I., Schultz, J.M.; Kristiansen, F.H., Development of windows based on highly insulating aerogel glazings, Journal of Non-Crystalline Solids, v 350, Dec 15, 2004, ISA-7, p351-357. (aerogel-window-Jensen2004.pdf)
- http://www.aerogel.com/
- http://www.va-q-tec.com/
- Dariush Arasteh, et al, Zero energy windows, Proceedings of the 2006 ACEEE Summer Study on Energy Efficiency in Buildings, August 13-18, 2006, Pacific Grove, CA. (ZeroEnergyWindow-Arasteh2006.pdf)
- http://www.southwall.com/southwall/Home/Residential/Products/HeatMirrorInsulatingGlass.html
- http://www.efficientwindows.org/ low-e2 window
- http://windows.lbl.gov/adv_Sys/hi_R_insert/default.htm
- Simmler, H. , Brunner, S., Vacuum insulation panels for building application: Basic properties, aging mechanisms and service life, Energy and Buildings, v 37, n 11 SPEC. ISS., November, 2005, p 1122-1131. (VIP-Properties-Simmler2005.pdf)
- G.Alvarez, J.J.Flores, P.K.Nair, Influence of thermal emittance on the performance of laminated solar control glazing, Applied Thermal Engineering, 21(2001),1813-1828. (thin-film-control-Alvarez2001.pdf)
- A.M.Papadopoulos, State of the art in thermal insulation materials and aims for future developments, Energy and buildings,Vol.37, Issue 1, January 2005, P77-86;
How to cite this article
Cui, Y. and Riffat, S. (2010). 'Review of Latest Developments in Thermal Insulation Materials for Building Applications'. SET Proceedings, 9, pp. 1-13. https://doi.org/10.65582/set.2010.174