Skip to content
Caravel Press

Conference paper

Experimental Study on the Pressure Drop and Water Cooling Characteristics by Steam Driven Ejector and Jet Condenser

, , , , ,

1Graduate School, Dept. of Mechanical and Precision Engineering, Gyeongsang National University, Tongyeong, KOREA

2School of Mechanical and Aerospace Engineering, Gyeongsang National University, Tongyeong, KOREA

3Department of Building Services Engineering, Hanbat National University, Daejeon, KOREA

Published
23 September 2005
Pages
532-537
Received
23 September 2005
DOI
10.65582/set.2005.118
Access
Open access, © 2005 Copyright WSSET
Download PDF6 pages · 4.4 MB

Abstract

This study performed of a water cooling system by using a steam ejector and jet condenser to drop the temperature of the water in aquafarm by about 5°C from 25°C or higher. In this research, to replace the present water cooling system, we focused on a water cooling system operated by latent heat of evaporation, thus this system needs a vacuum pressure to evaporate the water in enclosed tank. The water cooling effects are dependent on the vacuum pressure in the enclosed tank, and the cooling water is generated by evaporation. As the experimental results, the absolute vacuum pressure obtained was about 5~8mmHg using a steam driven ejector with jet condenser in experiments from Type 1 to Type12. The temperature difference of the water is about 5°C from Figure 8, 10, 12. Figure 13, 15 and 17 is the graphs of temperature difference of heat exchanger. The obtained results are respectively ΔT=7°C, ΔT=5°C and ΔT=5.5°C. Figure 19, 21 and 23 is the graphs of temperature difference of heat exchanger. The obtained results are respectively ΔT=5.5°C, ΔT=5.5°C and ΔT=5.5°C.

Keywords. driven ejector; Jet condenser; Aquafarm; Vacuum; Latent heat of evaporation

© 2005 Copyright WSSET

Free to read, download, print and share, unaltered and for non-commercial purposes, provided the authors, the paper and the proceedings are credited. Any other use, including commercial use or adaptation, needs written permission: write to [email protected].

← SET Proceedings