In process industry large amounts of energy are rejected to the ambient. Recovery of this surplus energy is a wide topic. Among the strategies for energy recovery, production of electricity is very interesting, due to the versatility of this form of energy. For the relatively low temperature heat, which is most commonly encountered for industrial surplus heat, the Organic Rankine Cycle is a well established technology. The transcritical Rankine Cycle recently received special attention due to its performances for energy recovery from low temperature sources. CO2 is a natural candidate as working fluid for this technology. It combines high performance, low cost, low toxicity, is non-flammable and has no environmental impact. This paper focuses on the off-design operation of Rankine cycles and compares the behaviour of transcritical CO2 cycles and an ORC cycle with R-123 as working fluid. The main observation is that the ORC is very sensitive to reduction in available heat, and will with only small changes get droplets in the inlet of the expander. This shows that it is reasonable to operate the ORC with some degrees superheat, to have a buffer. Superheating the outlet 5 to 10 K has only a small effect on the cycle performance. However the gained robustness is also relatively small. With small increments in the available heat source, the CO2 cycle also seem to have a marginally better response without control of the process, which indicates that it is more robust and less in need of detailed control.
Keywords. ORC; Power Production; Surplus heat
References
Crook, A.W., ed. 1994 Profiting from low grade heat. IEE Energy Series 7, The Watt Committee on Energy. The Institution of Electrical Engineers.
Dipippo, R., 2005. Geothermal power plants. Principles applications, and case studies.: Elsevier.
Holdman, G., Chena geothermal power plant, in Alaska energy cost reduction solicitation final report. 2007.
Obernberger, I., H. Carlsen, and F. Briedermann. 2003 State of the art and future developments regarding small scale biomass CHP systems with a special focus on ORC and Stirling engine technologies. in International Nordic Bioenergy. Jyvaskyla.
Invernizzi, C., P. Iora, and P. Silva,2007. Bottoming micro-Rankine cycles for micro-gas turbines. Applied Thermal Engineering. Vol 27: pp. 100-110.
Koren, S. and J. Pettersen 1990. Low temperature power production. Technical and industrial challenges. Spung seminar
García-Rodríguez, L. and J. Blanco-Gálvezb,2007. Solar-heated Rankine cycles for water and electricity production: POWERSOL project. Desalination. Vol 212: pp. 311-318.
Manolakos, D., G. Papadakis, S. Kyritsis, and K. Bouzianas,2007. Experimental evaluation of an autonomous low-temperature solar Rankine cycle system for reverse osmosis desalination. Desalination. Vol 203(366-374).
Nadav, D. 2007. Recovered energy generation (REG) for the gas pipeline industry. Waste heat to power generation workshop
Koren, S. 2008. Private communication with Ormat sale manager. June 2008
Larjola, J.,1995. Electricity from industrial waste heat using high-speed organic Rankine cycle (ORC). . Int. J. Production Economics. Vol 41: pp. 227-235.
Drescher, U. and D. Brüggemann,2007. Fluid selection for the Organic Rankine Cycle (ORC) in biomass power and heat plants. Applied Thermal Engineering. Vol 27: pp. 223-228.
Saleh, B., G. Koglbauer, M. Wendland, and J. Fischer,2007. Working fluids for low-temperature organic Rankine cycles. Energy. Vol 32: pp. 1210-1221.
Bertrand, T.F., G. Papadakis, G. Lambrinos, and A. Frangoudakis,2009. Fluid selection for a low-temperature solar organic Rankine cycle. Applied Thermal Engineering. Vol 29: pp. 2468-2476.
Borsukiewicz-Gozdur, A. and W. Nowak,2007. Comparative analysis of natural and synthetic refrigerants in application to low temperature Clausius–Rankine cycle. Energy. Vol 32: pp. 344-352.
Angelino, G. and C.M. Invernizzi,2009. Carbon dioxide power cycles using liquid natural gas as heat sink. Applied Thermal Engineering. Vol 29: pp. 2935-2941.
Cayer, E., N. Galanis, M. Desilets, H. Nesreddine, and P. Roy,2009. Analysis of a carbon dioxide transcritical power cycle using a low temperature source. Applied Energy. Vol 86(7-8): pp. 1055-1063.
Chen, Y., P. Lundqvist, A. Johansson, and P. Platell,2006. A comparative study of the carbon dioxide transcritical power cycle compared with an organic rankine cycle with R123 as working fluid in waste heat recovery. Applied Thermal Engineering. Vol 26(17-18): pp. 2142-2147.
Zhang, X.R., H. Yamaguchi, K. Fujima, M. Enomoto, and N. Sawada,2007. Theoretical analysis of a thermodynamic cycle for power and heat production using supercritical carbon dioxide. Energy. Vol 32: pp. 591-599.
Span, R. and W.U. Wagner,1996. A new equation of state for carbon dioxide covering the fluid region from the triple-point temperature to 1100 K at pressures up to 800 MPa. Journal of Physical and Chemical Reference Data. Vol 25(6): pp. 1509-1596.
Chan, C.Y. and G.G. Haselden,1981. Computer-based refrigerant thermodynamic properties. Part 1: Basic equations. Int. Journal of Refrigeration. Vol 4(1): pp. 7-12.
Gnielinski, V.,1976. New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow. 16(April): pp. 359-368.
Moser, K.W. and R.L. Webb,1998. A New Equivalent Reynolds number Model for Condensation in Smooth Tubes. Journal of Heat Transfer. Vol 120(2): pp. 8.
How to cite this article
Walnum, H.T., Ladam, Y., Nekså, P. and Andresen, T. (2010). 'Off-design operation of ORC and CO2 power production cycles for low temperature surplus heat recovery'. SET Proceedings, 9, pp. 1-8. https://doi.org/10.65582/set.2010.034
